- Видео 194
- Просмотров 4 476 907
Tough Guys TV
США
Добавлен 30 апр 2018
Welcome to Tough Guys TV
This channel is dedicated to bringing relevant, creative, and unique perspectives to all types of DIY Projects, Product Testing, Remodeling & Construction Projects, Homesteading, Building Stuff and even sometimes Breaking Stuff. Part vlog and part documentary, we want to mix our own approach to these projects and hopefully help you on your own DIY adventures. You’ll see our Successes and our Failures, as we will strive to never cut anything out - we want to deliver the true DIY experience you!
Our goal is to get new videos out at least a couple times per month, no official upload schedule just stay tuned to check out each video as they come out. Thank you so much for visiting our channel, and we hope you'll stay awhile!!
@toughguystv on Facebook, Instagram, and Twitter to see more of our Projects & Content!! Or reach me at david@toughguys.tv for Collaboration Requests or General Questions.
THANK YOU!!!!
This channel is dedicated to bringing relevant, creative, and unique perspectives to all types of DIY Projects, Product Testing, Remodeling & Construction Projects, Homesteading, Building Stuff and even sometimes Breaking Stuff. Part vlog and part documentary, we want to mix our own approach to these projects and hopefully help you on your own DIY adventures. You’ll see our Successes and our Failures, as we will strive to never cut anything out - we want to deliver the true DIY experience you!
Our goal is to get new videos out at least a couple times per month, no official upload schedule just stay tuned to check out each video as they come out. Thank you so much for visiting our channel, and we hope you'll stay awhile!!
@toughguystv on Facebook, Instagram, and Twitter to see more of our Projects & Content!! Or reach me at david@toughguys.tv for Collaboration Requests or General Questions.
THANK YOU!!!!
Видео
Day at the Caldwell Zoo in Tyler TX #bestdayever #fatherandson #dadlife #zootrip #zooday #zoo
Просмотров 62613 дней назад
Survive the Summer with Shade RV!
Просмотров 1,5 тыс.13 дней назад
Survive the Summer with Shade RV! #rvlife #rvliving #rvlifestyle #rving #rvfulltime In this video we are installing an RV Cover by Shade RV. You can review all they have to offer over at www.shaderv.com. These covers are designed to help block damaging solar heat, helping you to keep your RV cooler in the summer and extend the life of your RV roof and AC systems. They make a wide range of optio...
Grilling with Fire & Smoke Society #grilledchicken #grilling #grillingseason #bbq #cookingathome
Просмотров 25018 дней назад
Progress!! EIFS Going UP! #newconstruction #construction #exteriordesign #builder
Просмотров 49921 день назад
Back at the Jobsite #newconstruction #tools #impactdriver #bosch #builder
Просмотров 2,9 тыс.Месяц назад
Electrical Inspection Prep #construction #newconstruction #dallastx #builder #townhomes #electrical
Просмотров 3,3 тыс.Месяц назад
Desktop Engraving with the Xtool F1 #laserengraver #lasercutter #lasercutting #lasercuttingmachine
Просмотров 476Месяц назад
Impact Driver/Wrench by Bosch #tools #toolsofthetrade #toolreview #impactdriver #review
Просмотров 2,1 тыс.Месяц назад
Electrical Site Walk #newconstruction #construction #constructionlife #dallastx #builder #maker
Просмотров 3,4 тыс.Месяц назад
New Bosch Impact Driver #toolreview #toolreviews #impactdriver #tools #toolsofthetrade #bosch
Просмотров 2,6 тыс.Месяц назад
3D shapes with XTool S1! #lasercutting #lasercuttingmachine #laserengraver #laserengraving
Просмотров 10 тыс.Месяц назад
Retrofit Trailer Jack Install #flatbedtrailer #diy #homestead #hauling #howtofix #construction
Просмотров 4,4 тыс.Месяц назад
Work Life: Site Visit & Project Update #newconstruction #construction #constructionlife #dallastx
Просмотров 5812 месяца назад
Ready for Summer? How To Build Cornhole Boards https://youtu.be/43rCxfI5594 #woodworking
Просмотров 5112 месяца назад
Ceiling Light Mock-Ups #diy #construction #newconstruction #lighting #builder #dallastx
Просмотров 4272 месяца назад
Do you still like this pool?
bro your shop and skills are so good. im impressed with your products man. SIIIIIIICK
Nice
That looks tasty
That looks so fun
I used to be in Tyler a lot and the zoo there is truly beautiful.🫶🏼
It’s so nice!! Plus it’s not overcrowded like when we go to dallas. The Fort Worth zoo is always a treat as well.
Weird I got a different control 🤔
How long does it take to fill it with water??
It didn’t take too long, I think we filled it up overnight, but the morning it was good to go
Do not recommend this tool, terrible customer service. Sending mine back.
What specifically was wrong? Did you reach out to them for help? Was it just defective? If you’re going to take the time to say something negative, give it context at least so it can be helpful, and best case the company sees it and makes a positive change. 👍🏻
Was anyone else's backboard bent a little? It's almost like to get those 2 screws into the (bracket 2 backboard) it has to bend a little. I put them in last night and it started raining then came out today and I swear the backboard is even more bent now!...
Make tutorials assuming we don’t have those tools that you do
Or I make tutorials with the tools that I have because those are the tools that I have to build the thing that I bought to build. Sometimes you have to work with what you have. Sometimes you have to be creative. There’s no way for me to make videos based on what every other person on earth happens to have or not have in their garage.
@@TheToughGuysTV my bad you’re right. I was pissed off in that moment
Nice one.... just about to crack mine out n build our kitchen 😂
Good luck on your build! And thanks for watching! 🤙🏻
How’s the shade going/treating you now? Do you feel any difference?
So far so good! The AC isn’t running around the clock. It’s def still hot being in an RV when it’s summer in TX, no way around it but it has felt like a difference to us. I also like the added protection against hail!! The only thing to note is that we do have to tighten this up after a decent wind storm, but that’s a mild inconvenience at best.
Was about to throw away that paper washer 😅. Glad I stumbled on your video. Thanks bro 😎
Hey! Thank you! Glad the video helped out a bit 🤙🏻
My Bostitch drill and impact set got stolen a few months back (cant pick your family) got them at pawn shop for 60 bucks 5 years ago. Anyways I got this for my birthday recently brushed motor with the basic charger 20-volt. It does what I needed it to do I underestimated it a little bit. Had to replace six 8ft 5/4in pieces for a porch. Did good with deep deck screws drove 48 of them all nice and snug still had almost a full battery.
Skils battery tech is def underrated in my opinion, and their drivers and impact drills are solid! Glad you’ve had good luck with them as well!
They say if you said those softball or the baseball down on top of the hole and hit it with a rubber mallet it should make a perfectly round bend on the edges
That would’ve worked great no doubt!
You mentioned anxiety, but then didn’t say whether it helps with anxiety. I would love to know if this gradually helps to decrease anxiety?
It has helped me, but I would say it helps as a part of a bigger picture. It’s less caffeine for starters, than regular coffee, so that’s definitely a good thing. I’ve been drinking this going on 3 yrs, and I can for sure say my life is less anxious overall, but over that time span I have also learned to meditate, I eat better, I exercise more regularly, etc - all of those things contribute. In the video I talk about this helping me with a routine, and the routine being the catalyst to feeling better - so that would be my advice, make this a tool in the toolbag, it’s one part of a bigger solution. Good luck with your journey 🙏🏻
You skipped the optional support shelf?
I’ll take your word for it 🤷🏼♂️
How tall are u man ?
A gentleman’s 5’11” 🤠
Wholesome fun! 👍
Hey! It was the best day, need more of these! Thanks for the comment 🙏🏻
I have the non sliding version of this miter saw and notice that when the blade enters the arbor slot(when bade is down at lowest point of cut)(I think arbor slot is what it is called), the blade is much closer to to left side of the arbor slot than the right(not centered in the middle of the arbor slot). Don’t see any adjustment to fix that. Any thoughts appreciated. Thx
It could just be that the slot is a little off? I’m not aware of an adjustment for that, but potentially you can adjust the deck, the entire bottom section. I’d try reaching out to Dewalt support first to see if they could assist you
If you do head over to Shade RV to grab one, tell them David from Tough Guys TV sent you!
Love the vid helped me set up my shade thank you
Thank you. This video wad so helpful. And your children are adorable
Hey thank you! Glad the video helped out!! Enjoy the pool! ☀️
I have a question it is about the rotisserie that you get with your machine aren’t you set it up and you change the numbers in the program when you go back to using the laser for doing on wood do you have to go back and change those numbers or are they set in the machine and they automatically go back or do we have to go back and reset the numbers? I hope this makes sense.
I believe the software you use should help guide you with a rotary attachment, but I never used one with this laser so I don’t know for sure unfortunately
Great video.
Thank you! 🙏🏻
Thanks brother not the same Pool but the video went a long way
Glad the video helped out!! These things are tough to put together! Enjoy!
I really appreciate your taking the time to explain how to assemble and use this router table. I am putting mine together right now during a beautiful, sunny day. Your explanations are excellent for beginners like me. 67 years old, but never too late to start! Thank you so very much.
Thank you so much for this comment!! I’m so glad the video helped out, I tried not to miss any steps! Good luck with this setup, I really enjoy using it!
Pieces of trash-animal-things.
Comments are good for the algorithm.
True 👍🏻
Did the sides of your pool pull in towards the middle of the pool? If so how did you fix the issue?
Our sides bowed outward a bit not inward, but I guess the top rail sort of ‘curved’ slightly in yes if I remember right.
I wish we would've found our old pool. It was 52' deep. I got this but they only have 42 inches. On the sides of the pool you'll literally spell D.A.D. with the rodes. The instructions I got were absolutely the worst instructions I've ever seen! It's like a child made them. I don't know if I put the F and E connectors in the right places. It's 11:30pm here so I don't know till morning. Hopefully because my fingers hurt from trial & error. I was hoping this video would say which bars and connectors went where, as the instructions are shyt!
I'm using this to see any gotchas to hopefully make installing the wk0813cwru 8000btu unit smoother, and you already saved me the trouble of the side accordions.
Do you turn the filter on while filling pool? Do you add the chlorine when it's filling? Very good video. I also got this pool from a friend. Thanks
Nice video however I wanted to see how to adjust the height on the bit from start to finish. That's what people like me are looking for.
Thank you so much! I was able to install the pool for my family! The kids and wife love it 🤘🙏👍👀❤️
Awesome! Glad the video helped out. Enjoy the pool!! 🤙🏻
Did you check the suction with/without?
I didn’t do any tests, but I’ve been using my vacs with these for almost 5 yrs and no issues on my end.
Can you have multiple thermostats on the app or just one ?
That’s a good question! I do not know the answer unfortunately, we only ever had the 1 connected.
Thank you!!
You’re welcome! 🙏🏻
Steep price for added upgrade. It should be $39.99.
Amazing video!!
Hey thank you! 🙏🏻
So you don't take the whit caps off for the sides
Must have been hard work
It was not too bad but HOT that day! 🤠
Love the vid dude
Thanks buddy 🙏🏻
I’ve got a different problem with mine when it comes to changing the blade 5:08 !!! The locking button is faulty so I can’t lock the blade to unloosen it 🫣
Thank you bro. You made it easier. God Bless
I have the same pool that is inside the box brand new 16 x 10 Coleman is it much smaller than 16X10 or is it the same size sometimes the manufacturer will say one size but once you build it is smaller.
Would like to see you how you attack it and more on what size screw to use for different thickness boards
I have 4 wires - R<G<B<W
thank you! This was so helpful
Hi I just learned about Dose and have been watching some other reviews on it. I appreciate your in-depth review and think I'll give it a try. New Subscriber
Hey! Thank you I appreciate the support! I still have mine daily, the quality of the drink has never changed, and their service is fantastic, always there if needed. I tried the matcha but that wasn’t for me. Good luck with it!!